How to clean real fire fireplace glass door?

How to clean real fire Fireplace glass door?

In our daily use, if the fire viewing state of the real fire fireplace is not good, it is difficult to enjoy its comfort and practicality. In the final analysis, the main reason is that the high temperature glass is fuzzy and unclean, which comes from the accumulation of not good use habits at normal times, is the so-called "three feet of ice is not cold in a day", if you want to thoroughly clean the dirt on it, you need to scrub according to the thickness of the soot, of course, if you have the right good use habits, and take measures to prevent the real fire fireplace high temperature glass from becoming dirty, Cleaning will be easier and less time-consuming.

Clean the high temperature glass of the real fire fireplace once a week during continuous use. Once untreated or wet wood is burned, additional cleaning is needed because burning the dye causes soot to accumulate faster. If you don't use a real fire fireplace often, then the interval between cleaning can be longer.

Before cleaning the high-temperature glass of the real fire fireplace, it is best to use the stove first, especially when you face black spots that are difficult to remove, you often find that after burning the fire, it is easier to clean the soot and dirt attached to the glass door; Alternatively, you can burn a creosote removal product or add a few spoonfuls of "Red Devil Lye" to the firebox to help reduce the buildup of impurities.

After the use of the real fire fireplace, do not directly try to clean, because at this time the residual temperature is still in, should let the stove cool naturally for at least 6-8 hours or so, do not have the lucky mind of "I only wipe the glass and do not touch the stove", generally speaking, it is OK to wait for a few days after cleaning.

Another trick to treating heat-resistant glass doors for real fire fireplaces is to use the ash left over after the wood is burned, stir the ash and water mixture into a paste, and add more water if necessary. Then dip a microfiber cloth into the mortar and scrub the glass. Wood ash has a high pH and contains calcium carbonate, which is why they are perfect for cleaning soot on glass.

Ten thousand times more than simply cleaning the pipe after the fact, or the correct operation in daily use, when we ensure that the ventilation is smooth, the wood burning in the furnace of the real fire will produce less smoke and less smoke accumulation, which is why clean burning is important to keep the glass clean. In order to achieve smooth ventilation and clean combustion, it is necessary to pay attention to the following points:



1. Do not allow debris to block the air intake.
2. Clean the ash regularly to keep the air intake clean.
3. When the combustion is in progress, make sure that the air intake is fully open and remain fully open until the end of the combustion.
4. Check whether the air damper and air vent work properly.
5. Make sure the flue and chimney are clean and tidy.

Finally, I would like to remind you that friends who like to use real fire fireplaces must avoid burning some softwood. Softwoods tend to contain more resin than hardwoods, so they cause more soot, soot, and creosote. Pine and birch trees, in particular, are fine as kindling, but when used as the main dye, these resins will leave soot on the glass that is extremely difficult to clean, so do not burn such wood in a real fire fireplace.